Systems for
Photopolymer CtP Plate Processors
CTP-Kleen Filter System
(datasheet)
Purpose: Filter
System for improving processor filtration reducing
maintenance and maximizing developer life lowering
processing costs.
Used On: Processors
that have enough pump to prevent low flow to spray bars.
CTP-Kleen2 Developer Filtration/Pump System
(datasheet)
Purpose: Filter
System for improving processor filtration reducing
maintenance and maximizing developer life lowering
processing costs.
Used On: Processors
that need a separate pump to avoid interfering with
processor pump flow & pressure.
PropH-T/P CtP Waste Neutralization System for Thermal &
Photopolymer Plates (datasheet)
Purpose: Dilutes
& Neutralizes High pH Effluent and Dispenses to Drain
with Flush to meet local sewer authority requirements and
help reduce drain plugging. pH of 8.5 or higher is
typically illegal to dispense to
drain.
Used On: All
thermal and photopolymer plate
processors
MCT-30 Metering/Collection Tank (datasheet)
Purpose: Used on
Large Tank Processors or Multiple Processors to allow
complete tank draining. Allows multiple processors on one
neutralization system.
Used On: All
thermal and photopolymer plate
processors
ProSoftCTP (datasheet)
Purpose: Removes
Hardness Minerals from Processor Wash Water improving plate
quality by preventing alkaline calcium deposits on plates
that have to be removed on press. Helps to prevent drain
plugging.
Used On: All
thermal and photopolymer plate
processors
PPR30AR Wash Water Recirculator with
Auto-Replenishment (datasheet)
Purpose: Recirculates
and filters wash water with dilution to minimize water
usage.
Used On: Must be
determined on a case by case basis. Not recommended unless
plate rep and customer are fully
committed.