Systems for Thermal CtP Plate Processors

CTP-Kleen Filter System (datasheet)
Purpose:
Filter System for improving processor filtration reducing maintenance and maximizing developer life lowering processing costs.
Used On:
Processors that have enough pump to prevent low flow to spray bars.

CTP-Kleen2 Developer Filtration/Pump System
(datasheet)
Purpose:
Filter System for improving processor filtration reducing maintenance and maximizing developer life lowering processing costs.
Used On:
Processors that need a separate pump to avoid interfering with processor pump flow & pressure.

PropH-T/P CtP Waste Neutralization System for Thermal & Photopolymer Plates
(datasheet)
Purpose:
Dilutes & Neutralizes High pH Effluent and Dispenses to Drain with Flush to meet local sewer authority requirements and help reduce drain plugging. pH of 8.5 or higher is typically illegal to dispense to drain.
Used On:
All thermal and photopolymer plate processors

MCT-30 Metering/Collection Tank
(datasheet)
Purpose:
Used on Large Tank Processors or Multiple Processors to allow complete tank draining. Allows multiple processors on one neutralization system.
Used On:
All thermal and photopolymer plate processors

ProSoftCTP
(datasheet)
Purpose:
Removes Hardness Minerals from Processor Wash Water improving plate quality by preventing alkaline calcium deposits on plates that have to be removed on press. Helps to prevent drain plugging.
Used On:
All thermal and photopolymer plate processors

PPR30AR Wash Water Recirculator with Auto-Replenishment
(datasheet)
Purpose:
Recirculates and filters wash water with dilution to minimize water usage.
Used On:
Must be determined on a case by case basis. Not recommended unless plate rep and customer are fully committed.